Modules
-
100A Multirotor ESC Power Distribution Battery Board For Quadcopter – ROBOZONE
₹149.00₹99.00- Material: glass fiber
- Compatible with MK KK flight control installment pitch of holes
- Compatible with MK KK flight control system
- Can connect 1-8 ESC.
- Board Dimensions : 50 x 50 x 2 mm.
- Weight: 8 gm.
- Hole Spacing: 45mm Square and 35mm Square (Compatible with KK 45mm spacing)
-
150W DC-DC Step-Up Boost Converter 10-32V to 12-35V 6A Adjustable Power Supply Module -ROBOZONE
₹199.00₹155.00- Input voltage :10-32V
- Output voltage: 12-35V (adjustable)
- Output Current: 10A (MAX)
- Input Current: 16A (MAX) (Please enhance heat dissipation if more than 10A)
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
- Equips Multi-turn Potentiometer.
-
2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna – ROBOZONE
₹299.00₹239.00- Voltage: 3-3.6V (recommended 3.3V) V.
- Maximum output power: +20dBm.
- Power-down mode current: 4.2uA.
- Operating Range: 1Km
- Antenna Gain (peak): 2Dbi.
- 2MB rate (Open area): 520m.
- 1MB rate (Open area): 750m.
- 250Kb rate (Open area): 1100m.
- It uses 2.4GHz global open ISM band, with license free.
- SPI interface facilitates the communication with MCU I/O port
-
4×4 Matrix 16 Keypad Keyboard Module 16 Button MCU – ROBOZONE
₹99.00₹49.00- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- 5 pins 2.54mm pitch connector, 4x 4type 16 keys.
- Sticker can peel off for adhesive mounting.
- Operating Voltage (V): 12 DC
-
433Mhz Wireless RF Transmitter Receiver Module for Arduino – ROBOZONE
₹199.00₹100.00- Frequency 434 MHz.
- Transmitter: Saw filter based ASK hybrid transmitter
- Transmitter supply voltage: 3~12V.
- Receiver: ASK superheterodyne receiver with PLL synthesizer and crystal oscillator.
- Receiver Supply voltage: 3-5V
- Receiver IF frequency: 500 KHz
- Receiver Sensitivity: -105dBm
- Receiver Supply current: 2.3mA
- Output power: 4~16dBm
- Turn on time: 20mS from power is switched on.
- Data rate 200bps to 3Kbps depending on the supply.
- Has a range of around 100m(when in line of sight and when transmitter is powered at 12V)
