BMS
-
1S 2.5A 3.7V 18650 Li-Po Li-Ion Lithium Battery Protection Board BMS Circuit Module
₹130.00- VERY IMP NOTE : Once all connections are done between battery pack and BMS, please give a initial charge to the battery pack first to activate the BMS.
- Number of Cells: 1, Normal Current: 1.5A, Peak Current: 2.5A, MOS tube can control battery charging and discharging
- Wide Operating Temperature Range
- Very low idle current consumption
- Internal 3 different overcurrent detectiton circuit
-
3 Series 20A 18650 Lithium Battery Protection Board 11.1V 12V 12.6V
₹220.00- 3S 11.1V 12.6V 20A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery).
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery).
- Continuous discharge current (upper limit): 20A (if the cooling environment is not good, please reduce the load current use).
- Continuous charge current (upper limit): 20A.
- Suitable for the drills with starting current below 80A, power below 135W
-
3 Series 40A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module
₹240.00- 3S 11.1V 12.6V 40A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery)
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery)
- Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
- Continuous charge current (upper limit): 20A
